|
Apollo Solar T80 Turbocharger MPPT
Charge Controller:
Power and Control in a Single
Device
The T80
TurboChargerTM integrates Maximum
Power Point Tracking, battery charge
management, state of charge information and
communications into a single device. With 80
Amps continuous output, the has the largest
capacity in the industry by over
30%.
Optimum MPPT and Charging
Efficiency
The T80
captures up to 35% more power from the
photovoltaic (PV) array. Our Patent Pending
MPPT algorithm starts early and locks onto the
peak power during rapidly changing insolation
and temperature
Energy
Monitor Built In
The T80 includes
a built-in Energy Monitor using TriMetricTM
Technology from Bogart Engineering. It tracks
power production and consumption to calculate
the energy remaining in the battery. State of
Charge (SOC) is displayed in Percent Full,
Amp-hours, Watt-hours and bar graph format. In
addition, 90 days of energy harvest history is
stored in the T80.
Continuous Rating to
45o C (113o F)
Ambient.
The T80
TurboChargerTM produces full rated power
without de-rating up to 40oC ambient
temperature. Above that, the output current is
reduced gradually to protect the life of the
T80 and then automatically ramped up as the
temperature decreases. High efficiency power
circuits and robust thermal design minimize
heat generation. The internal
temperature-controlled variable speed fan runs
just fast enough to maintain optimum
reliability.
Enhance Battery
Performance and Life
Supports
Flooded Lead Acid (FLA), GEL and Absorbed Glass
Mat (AGM) batteries. Four stage charging with
adjustable set points for all parameters.
Unequalled
Communications
The on-board
RS-232 and slot for optional add-in cards
provide data communication to Remote Readouts,
PCs and the Internet. System performance can be
monitored remotely and the T80 accepts software
upgrades from a PC.
For more
information on the Apollo T80 go to
http://www.apollo-solar.net/T80-turbocharger.htm
|
