|
SHURflo's 9300 series pump
offers a solution to your remote water needs.
It's rugged, durable and built to last. This
pump delivers a steady 1.0 GPM operation at 100
PSI maximum at 230 feet (70.1 m) using a 24
volt battery or bank of batteries. The SHURflo
9300 pump can also operate at 12 volts but the
output will be approximately 40-50% compared to
operating at 24 volts. It incorporates a unique
waterblocked cable connector that is impervious
to water leakage and condensation problems
preventing waterwicking. Great for applications
in livestock watering, irrigation, ponds,
islands, remote homes and cabins. Using
SHURflo's controllers, the 9300 pump can
operate directly from a 12 or 24 volt solar
module/array. Please see charts at bottom of
page for various flow rates for 12 and 24 volt
operation. 12 volt
chart 24 volt chart
Features:
- Long-life 12-24 VDC
operation
- For 4" wells or
larger
- Quick disconnect with
"Watertite-Gland" Design
- Corrosion-proof housing with
stainless-steel fasteners
- Runs dry without
damage
- 50 mesh stainless steel
inlet screen
- State of the art solid
diaphragm
- can operate PV direct
using
902-100 (24VDC) or
902-200 (12/24VDC)
This pump can deliver up
to 1000 gallons (3785 litres) per day from
shallow wells and will pump as high as 230 feet
(70 meters). It comes complete with a water
tight quick disconnect electrical connection
that does not require splicing. Is is housed
entirely in plastic and is able to run dry
without damage. The SHURlo 9300 can
be run PV direct or from batteries. Field
replaceable parts. Optional pump controllers
are required for use on PV direct
applications.
 Owner and Installation
Manual
Parts
List
and Diagram
|
