Ivan Labs El Sid SID20B12 12 volt DC
Circulating Pump
Ivan Labs Inc. El Sid
SID20B12 is a 20 watt 12 volt DC pump
capable of circulating up to 6.0 gallons
per minute of water. It operates from a 12 volt
battery or bank of batteries. It can also
operate from an AC to DC 12 volt wall
adapter. The SID20B12 will begin
to operate at 8 volts with as little power
as 1 watt. This pump is designed to be used in
radiant heat applications, hot water
baseboard or with inside or outside hot
water boilers. It uses 12 volt DC power
eliminating the need for an inverter. Each
SID20B12 pump only consumes 20 watts instead of
the 150-200 watts a standard 120 volt
circulating pump uses.
You may use a 2W2DELTA/12
temperature controller for more accurate and
efficient operation with your boiler or water
heater.
The SID20B12 is large enough
to circulate 6.0 gallons per minute of
water in a closed loop system such as a radiant
heat or hot water baseboard system. Generally,
each loop requires one pump.
Like all battery operated El Sid
pumps its features are as follows:
- Operates with
direct current eliminating the need for an
inverter
- Can accept
voltage from 0 to 16
volts
- Brushless
- Maintenance
free
- No bearings to
wear out or overheat
- Very quiet for
use in any area of a
home
- Can operate in
temperatures up to
250oF
- High pressure
(up to 175 psi)
- Very small and
light weight (2.75" sq , 2
lbs)
- Can be mounted
on vertical or horizontal
piping
Specifications:
| Watts |
20
|
| Maximum Head in Feet |
6.8 |
| Maximum Flow in GPM |
6.0 |
| Operating Voltage
(DC) |
8 to 16 |
|
