Renewable Energy New Brunswick

  Welcome to RenewCanada.com

" making Renewable Energy  affordable to Canadians since 2002"

To place an order please.... CALL: 1-888-485-2249 , FAX: 1-888-485-2259 or EMAIL: order@renewcanada.com

We accept  Visa  MasterCard  American Express  bank transfer or money order !!

 

RenewCanada's DC Breaker Panels

This is a list of the most common DC breaker panels we stock and sell. (updated December 22, 08)

If you do not see your DC disconnect listed please call 1-888-485-2249.

Please call 1-888-485-2249 or email for a shipping quote. We update our website daily!

What is a DC Disconnect/Breaker Panel ?

A DC disconnect is a device such as a breaker used to disconnect the batteries from a device such as an inverter. It is usually a breaker but could be as simple as a switch. We use the term DC disconnect instead of DC breaker panel although both terms are interchangeable. Each system should have a DC fuse (on the positive + conductor) mounted as close to the batteries as possible to protect the main cables from the batteries to the DC disconnect (DC breaker panel). Secondly, the system should have a means of disconnecting the batteries. This is where the DC disconnect is used. Most DC disconnects manufactured today, as well as the DC disconnects listed below, are DC breaker panels that have one or more spaces (slots) for large breakers (125, 175 and 250 amp) and several spaces (slots) for smaller type breakers 1 to 100 amp).

The three styles of DC disconnects we commonly supply and install are:

 Outback Flexware DC Disconnects - The Outback Flexware products are designed to make installation of the FX series inverters professional looking and simple. They are available in three styles: Flexware 250 series, Flexware 500 series and Flexware 1000 series. The 250 series are for use with one inverter and can be used on the other side of the inverter as an AC breaker panel. The 500 series can be used for one or two inverters. The 1000 series is usually used for more than two inverters, however it can be used for any number of inverters up to four. None of the Flexware products include any breakers. They must be purchased separately.

For more information on the Outback Flexware disconnects please go to:

 

outback flexware 250 dc disconnects

FW250

flexware 500 dc disconnects

FW500

flexware 1000 dc disconnects

FW1000



 Xantrex DC175/DC250 DC Disconnects - The Xantrex DC disconnects are designed for installation with the SW series Xantrex inverters but can be used for almost any inverter. Both models include one breaker (175 amp or 250 amp) and have another slot for one more large breaker (using a breaker mounting kit) making it suitable for installation of one or two inverters. The Xantrex DC disconnects also have spaces (slots) for up to four more of the CD/EA1 style (up to 125 volt DC) breakers as listed on our DC breaker page.

For more information on the Xantrex DC175/DC250 please go to http://www.xantrex.com/web/id/121/p/1/pt/5/product.asp .

 xantrex dc175 dc250 dc disconnects

DC175 DC250



 

Midnite Solar MNDC DC Disconnects - The newest additions to our DC disconnects are the products made by Midnite Solar. They are excellent alternatives to the DC disconnects listed above and are compatible with almost all inverters. They are very compact and simple to install. Each MNDC includes one large breaker (100,125,175 or 250 amp) and has slots for up to five inexpensive din mount 150 volt dc breakers. They are suitable for only one inverter systems as they only have space for one large breaker.

For more information on the Midnite Solar MNDC please go to http://www.midnitesolar.com.

 midnite solar mndc dc disconnects

MNDC



 Midnite Solar BABYBOX - is a very small four circuit, breaker panel. It is perfect for small inverters or DC loads such as lighting. They are usually used in small DC systems or as an add on to a large system. They use the same small din mount DC breakers as the MNDC.

For more information on the Midnite Solar BABYBOX please go to http://www.midnitesolar.com.

 Midnite Solar Baby Box DC Breaker Panel

BABYBOX



 Midnite Solar MNPV3 and MNPV6 - These are small three circuit and six circuit solar combiners.They can also be used as breaker panels indoors and outdoors. They use the same small din mount breakers as the MNDC and the BABYBOX. They are ETL Listed for use in Canada and USA for mounting on rooftops with up to a 3/12 pitch.

For more information on the Midnite Solar MNPV please go to http://www.midnitesolar.com.

 

MNPV



 

DC breaker panels in stock ship within 1 to 2 days. DC breaker panels not in stock please allow 2 to 3 weeks.

 DC Breaker Panels  Suggested Retail Our Price  In Stock
 Outback Flexware 250 DC Breaker Panel*  $110  $106

In Stock

 Outback Flexware 500 DC Breaker Panel*  $318  $299

In Stock

 Outback Flexware 1000 DC Breaker Panel*  $538  $479

In Stock

 
 Xantrex DC175 DC Breaker Panel (includes 175 amp breaker)  $362  $289

In Stock

 Xantrex DC250 DC Breaker Panel (includes 250 amp breaker)  $362  $289

In Stock

 

 Midnite Solar MNDC125 DC Breaker Panel (includes 125 amp breaker)  $229  $201

In Stock

 Midnite Solar MNDC175 DC Breaker Panel (includes 175 amp breaker)  $259  $224

In Stock

 Midnite Solar MNDC250 DC Breaker Panel (includes 250 amp breaker)  $259  $224

In Stock

 Midnite Solar Adapter Plate to fit 80 volt DC Panel Mount Breakers  $7  $5

In Stock

 Midnite Solar BABYBOX Breaker Panel (no breakers)  $41  $36

In Stock

 Midnite Solar MNPV3 PV Combiner  $98  $96

In Stock

 Midnite Solar MNPV6 PV Combiner  $119  $110

In Stock



*The Outback Flexware units do not include any breakers.


Don't want to pay
for shipping and handling
...Click here
to see how!!!
 

Check the following links to see if you qualify for a renewable energy production tax credit.

Canadian Government Incentives and Rebates

United States Government Incentives and Rebates